The maintenance skills of brick cutting machine equipment can save time and effort while ensuring better maintenance results. We don't need to send someone to watch it every day. If you are interested, please see the following introduction:

1. Every time the equipment is in production, if you do not want to do the preliminary inspection, the equipment should be idling for 2-5 minutes after starting up. If there is no abnormality, the production will be restarted. If any part of the problem is found, it will be stopped in time to eliminate the problem. A failure in production has an impact.

 2. During the production of the brick cutting machine, it is strictly forbidden to repair the equipment directly because of any failure. It must be stopped for processing, and if the equipment is hot, the fuel tank cover must not be opened, and it must be stopped before inspection and processing.

3. When the brick cutting machine is in production, the control parts must be adjusted, and each connecting part must be checked, and it is better to carry out professional production after the test machine.

4. For newly installed equipment, after one week of equipment production, all oil circuits must be filtered once, and the oil tank must be cleaned. Then, according to the working load of the machine, the oil should be replaced every 3-6 months, and the oil tank should be cleaned once. Can.

5. The brick cutting machine equipment is all metal parts, so we must pay attention to preservation, avoid the open air, and take measures to prevent rain, sun and frost to ensure the production of the equipment.

The effects of the methods described above are very obvious, but if we have the time and ability, it is better to regularly perform professional maintenance on the brick cutting machine, because these usual maintenance can only ensure that the equipment will not have major failures. , Welcome customers to visit our company to buy.